Hi-Target ZTS-320R Series User Manual

1
Preface
Thanks a lot for purchasing our ZTS-320(R) series total
station! As your handy construction toll, it will provide you
with the most efficient and economic solutions to your job. To
fully utilize the potential of your instrument and protect your
investment, you need to, as we strongly suggest, thoroughly
read this manual before starting any operations. Should you run
into any problem, Hi-Target‟s technical support team will be
happy to assist you.
Product insurance:In order to provide best service of our
company, please send back the instruments‟ version, number,
purchasing date and your valuable suggestions to us. Thank
you for your cooperation.
Notice: We reserve the rights of the updating of the
products and the improvement in the technical parameters
which we may not announce in advance. The Pictures in the
manual is for reference only, please take the actual item as the
standard.

Hi-Target ZTS-320R Series Specifications

General

Model	ZTS-320R Series
Angle Measurement Accuracy	2"
Telescope Magnification	30x
Laser Plummet	Yes
Operating Temperature	-20°C to +50°C
Type	Total Station
Distance Measurement (Reflectorless) Accuracy	±(3mm + 2ppm)
Display	LCD
Communication	USB
Dimensions	160mm x 150mm
Angle Measurement Method	Absolute Encoding
Distance Measurement (Prism) Accuracy	±(2mm + 2ppm × D)

Summary

Security and Safety Guide

Laser Product Warnings

Details warnings related to laser product classification and safety guidelines.

Keyboard and Display Functions

Basic Measuring Mode Functional Keys

Angle Mode Operation

Distance Mode Operation

Coordinate Mode Operation

Initial Instrument Setup Procedures

Instrument Power On and Off

Guides on switching the instrument on and off safely and correctly.

Skewed Calibration Setup

Reflecting Prism Constant Setup

Atmospheric Correction Setup

Manual Atmospheric Correction Input

Automatic Atmospheric Correction Calculation

Pre-Measurement Preparations

Instrument Unpacking and Storage

Procedures for safely unpacking and storing the instrument.

Instrument Mounting and Leveling

Guides on mounting the instrument onto a tripod and leveling it.

Centering and Leveling with Plumb

Centering with a Device

Battery Management and Charging

Eyepiece and Target Focusing

Angle Measurement Mode

Distance Measurement Mode

Coordinate Measurement Mode

Offset Measurement Modes

Angle Offset Measurement

Specific guidance for performing angle offset measurements.

Single Distance Offset Measurement

Details on measuring offsets using a single distance.

Double Distance Offset Measurement

Plane Offset Measurement

Column Offset Measurement

Instrument Operating Menu Navigation

Surveying Functions

File Selection for Surveying

Station Setup Procedures

Back-Sight Point (BBS) Setup

Azimuth Setup Procedure

Conducting Survey Measurements

Staking Out Operations

Staking Out Specific Points

Resection Method for Positioning

File Management Operations

File Dialogue Box Usage

Importing Data Files

Exporting Data Files

Disk Formatting Procedure

Firmware Update Procedure

Detailed steps for updating the instrument's firmware.

Instrument Programs and Applications

Remote Height (REM) Measurement

Guides for measuring target height when prism placement is difficult.

MLM Measurement Function

Polar Coordinate Measurement

Area Calculation Function

Roadway Design and Stake-out

Roadway Input Procedures

Calibration and Configuration

Index Error (I.E) Adjustment

Procedure for adjusting the instrument's index error.

Tilt Calibration Procedure

Horizontal Lining Input

Vertical Lining Input

Roadway Stake-Out Process

Roadway File Selection

Station and BBS Setup for Roadway

Executing Roadway Stake-Out

Instrument Adjustments and Corrections

Tubular Level Calibration

Procedure for adjusting and calibrating the tubular level.

Circular Level Calibration

Telescope Reticule Adjustment

Guides on checking and adjusting the telescope's reticule.

Collimation and Cross Axis Perpendicularity

Tilt Compensator Check and Calibration

Vertical Index Error (Angle i) Calibration

Centering Device Calibration

Addictive Constant (K) Check and Adjustment

Collimation Axis Parallelism Check

No-Prism Ranging Operation