105
6. Then the computer displays the process of sending.
After finishing updating, please close the hyper terminal.
Before starting and operating the instrument, please first
unload the battery of it and then load it with battery again. The
instrument is successfully pdated now.
9.3.8 The instrument as a memory disc
Users may use Mini USB connector to connect the
instrument to PC machine. The USB port is below the SD card
port. Start the instrument after connection.
The total station is now recognized as a memory disc by
PC machine. After opening the instrument file on the PC
machine, users may view the files saved in the instrument on
the it. Also, users may copy files to the PC machine.
Disconnect the PC machine to operate the instrument normally.
Note: never delete or alter the two „.sys‟ files in the
instrument. Do not copy senseless files that have nothing to do
with total station measurements to the instrument.
To Next Page
Loading...
Need help?
General
