46
6 - 5 Over winding alarm [option]
Hiab 190TM is equipped with an over winding alarm system.
If the hook block is too near the boom tip, the alarm system
will be activated.
z Before operating the crane, turn on the over winding
alarm switch.
z If the alarm is activated, retract the boom or lower the
hook.
z After operating the crane, turn off the over winding alarm
switch.
(note) Do not shorten the wire length.
Please be careful when the extending boom or the
raising hook, because the alarm system can not be
activated when of the electric wire is damaged etc.
To Next Page
Loading...
