HIAB EFFER 35 - User Manual

To Next Page

EFFER 35

Operator's Manual GB

This operator’s manual is an Original Instruction valid for crane models EFFER 35 from serial

number(s):

ME0003500401

2023-03

Main Page

Table of Contents3
Introduction7
Target Group and Scope of this Manual7
The Machinery Directive 2006/42/EC8
The Machinery (Safety) Regulations 20089
Indications in the Operator's Manual9
Structure and Parts of the Crane12
Main Groups12
Crane Base with Column and Slewing System13
Stabiliser System13
Boom System14
Operating System - Hydraulic Components16
LHV Load Holding Valves16
Description of the Crane17
Available Configurations17
Safety Precautions and Warnings18
Operating Conditions18
Wind Conditions19
Wind Speed19
Load Shape20
Working Height20
Definition of this Loader Crane20
Noise Declaration21
Signs on the Crane22
Maximum Load22
Maximum Load26
Signals When Using a Crane28
Use of the Crane32
Preparations for Use33
Crane Operation35
Driving with the Crane37
Use of Lifting Accessories and Interchangeable Equipment38
Use of Demountable Cranes39
Ending Crane Operation39
The Operating System40
Components of the Operating System40
Description of the Operating System40
Emergency Stop Buttons41
Standard Symbols and Functions of the Crane41
Main Control Valve43
Crane with Manual Control Station43
Crane with Remote Control [Option]45
SCANRECO Controller [Option]45
Buttons, Selectors and Leds47
Standard Functions and Symbols49
Battery and Battery Charger50
Warning Lamp and Audible Warning Device [Option]51
Pressure Gauge51
Starting Crane Operation52
Starting Operations52
Set the Stabiliser System54
Stabiliser System and Ground Conditions54
Activate the Stabiliser System55
Extend the Stabiliser Extensions55
Set the Stabiliser Legs56
Operate the Boom System out of Transport Position57
How to Operate the Boom System58
During Operation59
Hook Assembly59
Controlling the Crane Speed with the Controller SCANRECO [Option]59
Pressure Gauge60
Manual Extensions [If Installed]61
Hydraulic Couplings [Option]63
Ending Crane Operation65
Operate the Boom System into Transport Position65
How to Operate the Boom System65
Placing the Stabiliser System in the Transport Position66
Switching off the System68
Emergency Operation68
Crane Movements in an Emergency68
Transport Warning69
Maintenance and Service71
Service71
Warranty72
Follow the Maintenance Instructions72
Daily Inspection74
Monthly Inspection and Maintenance78
First Check78
Annual Maintenance79
Lubrication79
General Greasing of the Cranes79
Lubrication Schedule81
Lubrication of the Upper and Lower Slewing Bearing81
Lubrication of the Boom System82
Grease on the Stabiliser Extensions83
Lubrication of the Hooks83
Checking and Topping up Oil Levels84
Oil Tank / Hydraulic Oil84
Replacement of Filters86
Inlet Filter for Remote-Controlled Cranes87
Breathing Filter87
Bleeding Air from the Hydraulic System87
Decommissioning89
Decommissioning a Crane89
Technical Data91
Load Plate Table91
Identification of the Loader Crane92
Daily Inspection Checklist92

Need help?

Do you have a question about the HIAB EFFER 35 and is the answer not in the manual?

HIAB EFFER 35 Specifications

General

Brand	HIAB
Model	EFFER 35
Category	Construction Equipment
Language	English

Related product manuals

HIAB 335K HiPro CD CE

104 pages

HIAB X-HiPro 358-408-418 X4

138 pages

HIAB EFFER 35 - User Manual

Table of Contents

HIAB EFFER 35 Specifications

Related product manuals