HIAB EFFER 35 - The Machinery (Safety) Regulations 2008; Indications in the Operators Manual

1.3. The Machinery (Safety) Regulations 2008
• The Declaration of Conformity, delivered with the crane
contains (1):
• Business name and full address where the crane is
manufactured (2):
Factory addresses:
Hiab Cranes S.L.U. Pol. Ind. Malpica, calle E, 86
50016 Zaragoza, Spain
Cargotec Poland Sp. z o. o. Ul. Metalowa 2, 73-102
Stargard, Poland
Hiab Italia S.r.l. Via IV Novembre 12, 40061 Minerbio
(BO), Italy
• Description and identification of the loader crane (3):
Mark
Type: see chapter Identification of the crane.
Serial number
Manufact. year
Declaration of which provisions the loader crane fulfils.
• Name and address of the person authorised to compile
the technical file (4):
Name
Address
• Identity and signature of the person who drawn up the
declaration (5):
Name
Position
Date and Signature
1.4. Indications in the Operator’s Manual
Please pay attention to the following instructions and use extra caution in these cases. Inform other
users about these working safety symbols. In addition to the safety symbols and recommendations
contained herein, the rules and regulations regarding safety and accident prevention of the country
of application must be followed.
What must you do and not do?
The following indications are used in the Operator’s Manual:
DANGER
Danger to life for yourself or to bystanders.
Follow the instructions carefully!
UK Declaration of Conformity with the Supply of
Machinery (Safety) Regulations 2008
· complies with the provisions of the Supply of Machinery
(Safety) Regulations 2008;
· complies with the Electromagnetic Compatibility
Regulations 2016: Great Britain;
Technical file in accordance with The Supply of Machinery
(Safety) Regulations 2008, Annex VII (Part 7 of Schedule 2),
part A, is compiled by:
Introduction
EFFER 35 9