7. Ending crane operation
7.1. Operate the boom system into transport position
WARNING
A crane with interchangeable equipment and/or optional crane components can
differ from the operations described in this section. For this reason, study the
operating instructions for any interchangeable equipment and/or optional crane
components carefully.
DANGER
During folding of the boom system, always
operate a manually controlled crane from the
position indicated in the figure.
DANGER
• With remote controlled cranes, stay in a
safety area while the boom system is
moving.
• We recommend that you do these
operations slowly or use the option for
reduced speed.
7.1.1. How to operate the boom system
1. Retract the extensions completely (1).
CAUTION
The extensions might not retract in sequence.
2. Raise the 1st boom (2) until the boom reach about 45º.
3. Slew the crane to the parking position. Verify that the arrows signs (A) on the column and on
the base are aligned.
4. Operate the 2nd boom against the 1st boom (3) .
Ending crane operation
EFFER 35 65
To Next Page
Loading...
