Field Definition
If the printer detects any errors, the error codes are displayed here. See Error messages
for descriptions and resolutions.
Refresh: Re-displays the Details information.
Options Sets a background or rotates an image for printing. Available options are: Gray
Background and Rotate Image 180 degrees.
Restore Defaults - clears the check boxes to restore the default settings.
Card Type Options Print Mode: Sets the combination of speed and image quality necessary for a specific
application. Options are:
n Fast - optimizes for high-speed printing. With UltraCard and UltraCard Premium, this
mode can print an estimated 100 cards per hour. Other card types can print an
estimated 86 cards per hour. Actual speeds depend on the default settings.
n Premium - optimizes for print quality and can print an estimated 43 cards per hour.
Actual speeds depend on the default settings.
Density: Defines the relative density of the ink. Available values are: 0.0 - 1.0. The default
value is based on the selected mode.
Layer Interval (ms): Sets the number of milliseconds to wait between layers to let the ink
dry. Values are: 0 - 9000. Default value is 2000.
Layer Count: Sets the number of layers of ink used. Values are: 4 - 23. The default value is
based on the selected card type and the selected print mode.
Restore Defaults: Restores the default values for these settings.
PLT-04368, A.0 28 August 2020
Powering
Trusted Identities
HID® FARGO® INK1000
Windows User Guide
To Next Page
Loading...
