EasyManuals Logo

HID iCLASS SE Biometric User Manual

HID iCLASS SE Biometric
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
hidglobal.com
PLT-03331, Rev. A.2
INSTALLATION GUIDE
Specifications
RKL40 RPKL40 RKLB40
BASE PART NUMBER
929N 929P 928N
INPUT VOLTAGE (VDC)
12VDC 12VDC 12VDC
CURRENT
STANDBY AVG
1
170mA 170mA 195mA
MAX AVG
2
185mA 185mA 255mA
PEAK3
250mA 250mA 320mA
OPERATING
TEMPERATURE
-4°F to 149°F
(-20°C to 65°C)
-4°F to 149°F
(-20°C to 65°C)
14°F to 122°F
(-10°C to 50°C)
CABLE LENGTH
Communication Lines
Wiegand
500ft - 22 AWG (152m)
300ft - 24 AWG (91m)
RS-485
Max Bus Length: 4000ft (1,219m) - 24 AWG
Max Lenth Between Nodes: 1640ft (500m) - 24 AWG
UL REF NUMBER
4
RKL40Ex
1
x
2
x
3
RPKL40Ex
1
x
2
x
3
RKLB40Ex
1
x
2
x
3
SRD MODEL
RKCL40E RPKCL40E RKCLB40E
1
 Standby AVG - RMS current draw without a card in the RF field.
² Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL.
3
 Peak - highest instantaneous current draw during RF communication.
4
 UL Reference Number Deciphering
x
1
Reader Colors K = Black, G = Gray
x
2
Wiring N = Pigtail, T = Terminal
x
3
Communications N = No Module, R = RS-485
Parts
Reader and base plate assembly (1)
Installation Guide (1)
iCLASS SE Biometric Reader User Guide (RKCLB40 only) (1)
Terminal connector (2)
M3.5 mm x 12 mm Phillips machine screw (4)
#6-32 x .375" Phillips self-tapping machine screw (4)
#6 x 1.5" Phillips sheet metal screw (4)
#6-32 x .4375" Spanner security screw, anti-tamper (black) (3)
#6-32 x .4375" Phillips security screw (black) (3)
Mounting Gasket (1)
SE BIO Initial Setup Reset Card 1 (RKLB40 only)
SE BIO Initial Setup Reset Card 2 (RKLB40 only)
Recommended
Cable, 4 conductor, 22 or 24 AWG (65 mm or 51
mm) twisted pair, over-all shield and UL approved
(Belden 3107A, or equivalent) - RS–485 + power
Cable, 6 to 9 conductor, 22 or 24 AWG (65
mm or 51 mm) over-all shield, (Alpha 1296C or
equivalent) - Wiegand + power
DC power supply
Metal or plastic double-gang junction box
Reader spacer when mounting on or near metal
or metal junction boxes - see How to Order Guide
Security tool (for spanner security screw, anti-
tamper) HID 04-0001-03
iCLASS SE® Biometric/
iCLASS SE Display Reader
RKL40, RPKL40, RKLB40
SRD MODEL: RKCL40E, RPKCL40E, RKCLB40E
This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output
are fictitious. Specifications are subject to change without notice.
© 2017 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID Brick Logo, the Chain Design, and iCLASS SE are trademarks or registered trademarks of HID
Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HID iCLASS SE Biometric and is the answer not in the manual?

HID iCLASS SE Biometric Specifications

General IconGeneral
Biometric TypeFingerprint
Communication InterfaceWiegand, OSDP
Ingress ProtectionIP65
Tamper DetectionYes
Authentication MethodBiometric and RFID
Card CompatibilityiCLASS
Operating Temperature-20°C to 70°C
Storage Temperature-40°C to 85°C
Operating Humidity5% to 95% non-condensing

Related product manuals