HID Vertx CS V100 User Manual

Quick Installation Guide
V100 DOOR/READER INTERFACE
PROPRIETARY INFORMATION. This document contains proprietary information which may not be duplicated,
published or disclosed to others, or used for any purpose without written permission from HID Corporation. 2004
© HID Corporation. All rights reserved.
Document Version 1.1
August 4, 2005
Document Number 6080-907B
9292 Jeronimo Road
Irvine, CA 92618-1905

HID Vertx CS V100 Specifications

General

Brand	HID
Model	Vertx CS V100
Category	Controller
Language	English

Summary

Introduction

Parts List

Lists included V100 Door/Reader Interface, screws, resistors, and guides.

Product Specifications

Details power, current, operating temperature, and humidity for the V100.

Cable Specifications

Outlines recommended cable types, lengths, and specifications for various connections.

Installation Overview

Step 1: Preparations

Covers pre-installation tasks, including reading the guide and handling ESD precautions.

V100 Preparations

Details jumper installation for RS-485 bus termination and handling specific enclosure scenarios.

Step 2: Hardware Installation

Mounting Instructions

Guidance on secure mounting, using screws, and positioning for wiring and airflow.

Wiring the V100

Details power, alarm inputs, and reader connections using pinouts for the V100 interface.

RS-485 Connections

Connects V100 to V1000 via RS-485 cable, noting address limitations on common bus ports.

Interface Address Configuration

Instructions on setting the interface address dial and documenting it for the V100.

Output Connections

Explains general purpose output connections and pin usage for relays on the V100.

Input Connections

Details connections for REX, door monitor, and other inputs, including supervised configuration options.

Contact and Support Information

HID Corporation Details

Provides HID Corporation's address, website, and phone numbers for sales and technical support.