Hidea HDF6 - Predelivery Check; General Periodic Maintenance

MNT
Maintenance
Outline
Maintenance interval chart
Predelivery check
Checking the battery
Checking the cooling water pilot hole
Checking the engine oil level
Checking the engine shut-off switch
Checking the fuel system
Checking the gear oil level
Checking the gear shift and throttle operation
Checking the outboard motor mounting height
Checking the steering system
Checking the throttle cable
Checking the tilt system
Starting the engine
Test run
Break-in
After test run
General periodic maintenance
Checking the anode
Checking the battery
Checking the cooling water passage
Checking the engine idle speed
Changing the engine oil
Checking the engine oil level
Checking the engine shut-off switch
Checking the fuel joint and fuel hoses
(fuel joint to carburetor)
Checking the fuel strainer
Changing the gear oil .
Checking the gear oil level
Checking the ignition timing
Lubricating the outboard motor
Checking the propeller
Checking the spark plug
Checking the spark plug cap
Checking the thermostat .
Adjusting the throttle link rod and throttle cable .
Checking the top cowling
Checking the valve clearance
Checking the water pump
181