EasyManua.ls Logo

HighGear Compass - Modes of Operation and Settings Introduction; Setting the Watch Functions

HighGear Compass
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
english
14
english
MODES OF OPERATION
ENDURO MAIN DISPLAY MODES
Advance through the modes below using QUICK PRESSES of the MODE key.
SETTING THE WATCH FUNCTIONS
EL/BACKLIGHT SYSTEM
Activate the BACKLIGHT system at any time by PRESSING of
the
EL/LIGHT key. The backlight will remain active for a period
of 2 seconds.
AUTO EL/BACKLIGHT
Auto-EL mode automatically illuminates the backlight for 2
seconds whenever any key is pressed. This is convenient when
operating the watch at night or in other low light situations.
To activate/deactivate the AUTO-EL MODE,
PRESS & HOLD
EL/LIGHT key for 2 seconds. Auto-El status is indicated by
icon in upper center of display.
NOTE: Excessive use of the backlight system will result in shorter battery life.
TIME CHRONOGRAPH REVIEW DATA
COMPASS
(
ENDURO COMPASS ONLY)
ALARM
TIMER

Related product manuals