8
improperly installed, the fan and thermal pad will be unable to
sufficiently cool the NVMe SSDs and controller componentry,
which may result in damage to the NVMe SSDs or controller
hardware, performance loss, unstable I/O, and the loss of data.
Step 11. Power up the SSD external power supply.
Note: If the external power supply is not powered on, the NVMe
SSDs may drop offline or remain undetected, which could lead to
data loss.
R1508 relies on two power sources to support eight NVMe SSDs;
power supplied through the PCIe bus, and power from the
system’s PSU via an external 6 pin PCIe power cable. If the
external cable is not connected, there will be insufficient power to
support all 8 NVMe SSDs; this may cause the NVMe SSDs to
drop offline.
To Next Page
Loading...
