3
Data RAID Prerequisites
Data arrays are used exclusively for storage – they cannot be used to
boot a system.
1. You must have at least one NVMe SSD installed into the
SSD7104/SSD7204 controller.
2. The SSD7104 must be installed into a PCIe 3.0 and 4.0 x16
lanes.
3. The SSD7204 must be installed into a PCIe 3.0 and 4.0 x8 or
x16 lanes.
4. Operating system:
Windows 11, 10 / Server 2022, 2019, 2016, 2012R2 /
Microsoft Hyper-V
RHEL/Debian/Ubuntu/Fedora/Proxmox/Xenserver
/Rocky Linux (Linux kernel 3.10 and later)
Arch Linux (Kernel 5.17.5 and above)
macOS 10.13.6 ~ macOS 13.x
5. A motherboard that can support UEFI modes. Please check
the SSD7104 Compatibility List and
SSD7204 Compatibility
List for recommended motherboards.
To Next Page
Loading...
