10
Note: Make sure the aluminum cover is properly aligned with the
controller board (PCB), and that it makes full contact with the thermal
pad, before refastening it to the SSD7202. If the cover is improperly
installed, thermal pad will be unable to sufficiently cool the NVMe
SSD’s and controller componentry, which may result in damage to the
SSD’s or controller hardware, performance loss, unstable I/O, and the
loss of data.
Note: Please be sure to connect NVMe before using the product to
reduce the occurrence of unnecessary errors!
Note: Install the driver in the system first and then install the board
!
To Next Page
Loading...
