SSD7540 Linux CentOS8.2 Installation Guide
- 7 -
Press Ctrl+ALT+F2 to switch new console window and press ENTER to activate this
console.
And the then execute following commands with root user to copy the driver contents.
# mkdir /dd ← Create mount point for USB flash drive
# mount /dev/sda1 /dd ← Mount the USB flash drive to /dd
# cp -a /dd/hptdd /tmp/hptdd ← Copy driver installation
file to system temporary directory
# umount /dd ← Unmount the USB flash drive
When the USB flash drive is unmounted, please unplug the USB flash drive from the
mainboard. And then execute following command to install driver to install the Linux
CentOS.
#sh /tmp/hptdd/rhel-install-step1.sh ← Load SSD7540 driver.
e. After the above steps are completed, the system will automatically return to the
installation interface.
To Next Page
Loading...
