Hikmicro THUNDER User Manual

Thermal Image Scope User Manual
13
3.6 Correct Defective Pixel
The device can correct the defective pixels on the screen which are not performed as expected.
Steps
1. Hold to show the menu.
2. Select .
3. Press , , , and to move the cursor to the position of dead pixel.
4. Press to correct the dead pixel.
3.7 Flat Field Correction
This function can correct non-uniformity of display.
Steps
1. Hold to go to the menu.
2. Select and press to switch FFC mode.
– Manual: Hold in live view to correct the non-uniformity of display.
– Auto: The device performs FFC automatically according to the set schedule when switching
on the camera.
– External: Cover the lens cover, then hold in live view to correct the non-uniformity of
display.
3. Hold to save the settings and exit.
3.8 Set Picture in Picture Mode
Steps
1. In the view mode, hold to show the menu.
2. Select and enter PIP mode. The details show in the upper left corner.
● When range table is enabled, the PIP view is the detail of crosshair.
● When range table is not enabled, the PIP view is the detail of central part.
3. Press to switch the PIP type. Upper Left, Upper Middle, Upper Right, and OFF are
selectable.

Hikmicro THUNDER Specifications

General

Brand	Hikmicro
Model	THUNDER
Category	Thermal cameras
Language	English