Hikmicro THUNDER User Manual

Thermal Image Scope User Manual
vii
● It is recommended to reboot the device every 2 hours when using it to ensure the device
performance.
Using Environment
● Make sure the running environment meets the requirement of the device. The operating
temperature shall be -20°C to 55°C (-4°F to 131°F), and the operating humidity shall be 95% or
less.
● DO NOT expose the device to high electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright light.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd

Hikmicro THUNDER Specifications

General

Pixel Pitch	12 μm
Frame Rate	50 Hz
Aperture	F1.0
Record Video	Yes
Capture Snapshot	Yes
Wi-Fi	Yes
Display	0.39" OLED
Magnification	1x
Response Waveband	8 μm to 14 μm
Lens (Focal Length)	19mm
Battery Type	Rechargeable Li-ion
Power Supply	DC 5V/2A
Operating Temperature	-20°C to +50°C
Reticle	Yes
Storage Temperature	-30 °C to 60 °C (-22 °F to 140 °F)