HikRobot SC3000 Series - Device Components; OK;NG Indicator; Lens Cap; Light Source

SC3000 Series Vision Sensor Quick Start Guide
3
No.
Name
Description
2
OK/NG Indicator
It indicates the result of projects.
● The indicators are green when the project result is OK.
● The indicators are red when the project result is NG.
● The indicators are green and red when switching projects. After
switching, the indicators are unlit.
● The indicators are yellow when the device restarts or error occurs.
3
Lens Cap
It can be replaced with other lens cap. Refer to the device’s
specification for details.
4
Light Source
It refers to LED lamps providing light source.
Note
The default color of LED lamps is white. Red/blue/near-infrared is
optional.
5
Screw
It refers to the screw between device body and lens cap.
6
Screw Hole
It is used to fix the device to the installation position. You should use
M4 screw.
7
PWR Indicator
It is the power indicator. The indicator is green when the device
operates normally. Otherwise, it is red.
8
STS Indicator
It is the status indicator. The indicator is green when the project
operates normally. Otherwise, it is red.
9
LNK Indicator
It is network status indicator. The indicator is flashing green when
the network transmission is normal. Otherwise, it is unlit.
10
Button
It is used to trigger device to acquire images or switch projects.