SC3000 Series Vision Sensor Quick Start Guide
7
Chapter 5 Device Connection
Device connection to the client software is required for device’s configuration and remote
operations. This section introduces how to install the client software, set PC and device network,
connect the device to the client software, etc.
5.1 Install Client Software
SCMVS is a client software for device configuration and remote operations.
Note
● Check the Windows version. The client software is compatible with 32/64-bit Windows XP/7/10.
● You can get the client software installation package from https://en.hikrobotics.com/.
● The graphic user interface may differ by different versions of client software you use.
Steps
1. Double click the installation package to install the client software.
2. Select the language.
3. Read and check Terms of the License Agreement.
4. Click Start Setup.
Figure 5-1 Installation Interface
5. Select installation directory and click Next.
6. Finish the installation according to the interface prompts.
To Next Page
Loading...