HikRobot SC3000 Series - Output Signal Logic Levels

SC3000 Series Vision Sensor Quick Start Guide
17
If the output signal is NPN type, its internal circuit is shown below.
Figure 7-5 Internal Circuit of NPN Output Signal
Figure 7-6 Output Logic Level
When the external voltage and resistance is 12 VDC and 1 KΩ respectively, the electrical feature of
output signal is as follows.
Note
With different external voltage and resistance, the corresponding current and output logic level
low may have small change.
Table 7-2 Output Electrical Feature
Parameter Name
Parameter Symbol
Value
Output Logic Level Low
VL
212 mV
Output Logic Level High
VH
11.8 VDC
Output Falling Delay
TDF
0.4 μs
Output Rising Delay
TDR
0.4 μs