HIKVISION 26 Series User Manual

Fingerprint and Card Reader User Manual
8
1. Fix the mounting plate on
the wall with 2 provided
screws.
Note: Do not warp the
mounting plate when
installing.
2. Connect the cables between
the controller and the card
reader. For details, refer to 2.3
Wiring Cables.
3. Unscrew the screw at the
bottom of the card reader.
4. Buckle the card reader up to
the plate.
5. Fasten the card reader to the
plate with the set screw.

HIKVISION 26 Series Specifications

General

Brand	HIKVISION
Model	26 Series
Category	Card Reader
Language	English