Day/Night High-definition Dome Camera·User Manual
Figure 2-20 Three-axis Adjustment
2. Zoom and focus adjustment.
1). View the camera image using the monitor.
2). Loosen the zoom lock screw and move the screw between
T(Tele) and W(Wide) to obtain the appropriate angle of
view.
3). Tighten the zoom lock screw.
4). Loosen the focus lock screw and move the screw between
F(Far) and N(Near) to obtain the optimum focus.
5). Tighten the focus lock screw.
To Next Page
Loading...
