Day/Night High-definition Dome Camera·User Manual
3.9 PRIVACY MASK Setting
This feature allows you to cover certain areas which you don’t want
to be viewed or recorded.
The size, color, transparency of the areas is adjustable.
Steps:
1. After moving the cursor to PRIVACY, press the button to enter
PRIVACY submenu.
2. Select one privacy area in AREA SEL.
3. Set the values of TOP, BOTTOM, LEFT and RIGHT. The size
and position of the area is defined by these values.
4. Select the color and the transparency values for the privacy
area. Turn the MOSAIC on if you want mosaic privacy areas.
5. Repeat the steps 1 through 4 to program other privacy areas.
There are four areas available.
There are eight colors available.
The available values are 1.0, 0.75, 0.5, and 0.
Note: there are only 4 areas available in AREA SEL, when the
MOTION DETECTION function is on.
To Next Page
Loading...
Need help?
General
