Need help?Do you have a question about the HIKVISION DS-2CC11D3S-IR and is the answer not in the manual?
General| Image Sensor | 1/3" Progressive Scan CMOS |
|---|---|
| Signal System | PAL/NTSC |
| Min. Illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Day & Night | ICR |
| Synchronization | Internal synchronization |
| IR Range | Up to 20m |
| Weatherproof Rating | IP66 |
| Lens Mount | M12 |
| Wide Dynamic Range | Digital WDR |
| Lens | 3.6mm, 6mm optional |
| Video Frame Rate | 25fps (PAL) / 30fps (NTSC) |
| HD Video Output | 1 channel BNC HD output |
| S/N Ratio | More than 62 dB |
| Operating Conditions | -40°C to 60°C (-40°F to 140°F), Humidity 90% or less (non-condensing) |
| Power Supply | 12 VDC |
| Shutter Time | 1/25s to 1/50, 000s |
| Video Output | 1Vp-p composite output (75 Ω/BNC) |
| Effective Pixels | 1280 (H) × 960 (V) |
Details on FCC compliance, regulations, and operating conditions for the device.
Compliance with European standards (CE, Low Voltage, EMC, RoHS, WEEE) and directives.
Critical warnings about potential serious injury or death if instructions are neglected.
Precautions regarding potential injury or equipment damage if instructions are neglected.
Key features of the HD-SDI camera, including resolution, low-light performance, and design.
Diagrams and descriptions for HD-SDI Bullet and Dome camera components and connections.
Step-by-step guide for mounting and securing the HD-SDI Bullet Camera.
Step-by-step guide for mounting and securing the HD-SDI Dome Camera.
Information on the camera's fixed lens and its non-configurable nature.
Configuration of Shutter, AGC, SENS-UP, Brightness, ACCE, Defog, and Backlight parameters.
Adjusting color temperature using Indoor, Outdoor, Manual, ATW, and AWC-SET modes.
Selecting Color, B/W, or EXT modes for optimal day and night surveillance.
Utilizing 2D NR, 3D NR, and Smart NR to minimize noise in video streams.
Customizing camera name, digital effects, motion detection, privacy masks, language, and version.
Configuring Sharpness, Monitor display, OSD, LSC, and Video Output Standard (NTSC/PAL).
Restoring factory defaults and exiting the camera's menu system.
To Next Page