3.4 NR
NR (Noise Reduction) is used to reduce the noise in the video stream.
Move the cursor to NR, and press confirm to enter the NR submenu.
NR Figure 3-7
2D NR:
2D NR reduces the noise in a single frame to get a gentle image. You can set it ON
or OFF by pressing the OK button left/right.
3D NR:
Compared to traditional general 2D NR technology, 3D NR processes the noise
reduction between two frames instead of in one frame. It can decrease the noise
effect, especially when capturing moving images in low light conditions and
delivering more accurate and sharp image quality.
You can customize the S level and the E level which ranges from 0 to 100 to set
the 3D NR.