3.2.2 AGC
It’s a form of amplification where the camera will automatically boost the image
received in much lower light conditions than standard in order to optimize the
clarity of image in poor light scene. OFF, LOW, MIDDLE, and HIGH are selectable
for the AGC value.
Note:
The noise will be amplified if the AGC is on.
3.2.3 SENS-UP
SENS-UP increases the exposure on a signal frame, which makes a camera more
sensitive to light so it can produce images even in low lux conditions. You can set
the SENS-UP to OFF or AUTO according to different light conditions.
OFF: SENS-UP function is disabled.
AUTO: The SENS-UP function will atomically adjust itself to x2, x4, x6, x8, x10,
x15, x20, x30, and x60 according to the different light conditions.
3.2.4 Brightness
Brightness refers to the brightness of the image. You can set the brightness value
from 1 to 100 to darken or brighten the image. The higher the value is, the
brighter the image is.
3.2.5 ACCE(Adaptive Contrast & Color Enhancement)
It performs an image enhancement processing to enhance the visibility of an
image by expressing the contrast ratio of the image and improving the edge
information of the image effectively.
You can set the ACCE to OFF, LOW, MIDDLE, and HIGH.
To Next Page
Loading...
Need help?
General
