2 Installation
Before you start:
Please make sure that the device in the package is in good condition and all
the assembly parts are included.
Make sure that all the related equipment is power-off during the installation.
Check the specification of the products for the installation environment.
Check whether the power supply is matched with your AC outlet to avoid
damage.
If the product does not function properly, please contact your dealer or the
nearest service center. Do not disassemble the camera for repair or
maintenance by yourself.
Please make sure the wall is strong enough to withstand three times the
weight of the camera.
2.1 Installation of HD-SDI Bullet Camera
Steps:
1. Drill the screw holes in the wall according to the drill template.
To Next Page
Loading...
Need help?
General
