Set a Privacy Area:
Steps:
1. Move the cursor to DISPLAY, and press OK button to enter the privacy mask
edit interface.
2. Press the OK button to up/down/left/right to define the position of the
selected privacy mask area.
3. Press OK button again to enter the area size configuration interface after the
position is defined.
4. Press the OK button up/down/left/right to define the size of the selected area.
5. Select RET to return to the previous menu, or select AGAIN to re-configure the
privacy mask.
SELECT
Select the privacy mask area to configure. Press the OK button left/right to select
the area.
DISPLAY
Set to display the selected area or not.
COLOR
The color of the privacy area, 16 colors are selectable for each privacy mask.
DEFAULT
Restore the settings of privacy mask to the default.
3.5.5 Language
CHN1, CHN2, and ENG are selectable.
To Next Page
Loading...
Need help?
General
