SENS-UP
Adjust the sensor. X2, X4, X6, X8, X10, X15, X20, X30, and X60 are selectable.
3.5.7 RS485
If you want to configure the menu items remotely, you have to set the RS485
parameters of control device the same as those of camera.
RS485
Figure 3-15
Camera ID ranges from 0 to 255, which is used to recognize the corresponding
camera.
You can set the camera ID to ON/OFF to display the camera ID or not.
Baud rate ranges 2400 to 38400, which has be the same as that of the control
device.
3.5.8 Version
The software version is listed here.
To Next Page
Loading...
Need help?
General
