ATW
ATW mode means the white balance is continuously being adjusted in real-time
according to the color temperature of the scene illumination.
AWC→SET
The camera will adjust the white balance according to a certain environment. If
the environment is changed, you need to use AWC→SET to adjust the color
temperature again.
3.3 Day & Night
Color, B/W, and EXT are selectable for DAY and NIGHT switches.
COLOR
The image is color in color mode all the time.
B/W
The image is black and white all the time. And the IR LED turns on if the camera is
in night mode.
EXT
The image color switches from color to B/W or from B/W to color automatically
according to the light condition. And the IR LED turns on if the camera is in night
mode.
To Next Page
Loading...
Need help?
General
