Day/Night High-definition Dome Camera·User Manual
2 Installation
Before you start:
Please make sure that the device in the package is in good
condition and all the assembly parts are included.
Note: Please ensure that the wall is strong enough to withstand
three times the weight of the camera. If the wall is not strong
enough, the camera may fall and cause serious damage.
2.1 Disassembling
Steps:
1. Loosen the three screws on the edge of the lower dome with
the supplied screw driver.
2. Loosen the screw that secures the leash of the lower dome to
the camera. Remove the lower dome.
3. Remove the inner black liner.
To Next Page
Loading...
Need help?
General
