EasyManuals Logo

HIKVISION DS-2CD2012-I Quick Operation Guide

HIKVISION DS-2CD2012-I
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Network Bullet Camera·Quick Operation Guide
9
9
2 Installation
Before you start:
Make sure the device in the package is in good condition and all
the assembly parts are included.
Make sure all the related equipment is power-off during the
installation.
Check the specification of the products for the installation
environment.
Make sure the power supply is matched with your required
voltage to avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
Make sure that the wall is strong enough to withstand three times
the weight of the camera.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:
Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the installation
is finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.

Other manuals for HIKVISION DS-2CD2012-I

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2012-I and is the answer not in the manual?

HIKVISION DS-2CD2012-I Specifications

General IconGeneral
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Form factorBullet
Product colorWhite
International Protection (IP) codeIP66
Total megapixels1.3 MP
Maximum resolution1280 x 960 pixels
Supported video modes-
Video formats supportedH.264, M-JPEG
Supported graphics resolutions1280 x 720 (HD 720), 1280 x 960, 640 x 480 (VGA), 704 x 576
Camera shutter speed1/25(1/30) - 1/100000 s
Minimum illumination0.01 lx
Field of view (FOV) angle73.1 °
Sensor typeCMOS
Optical sensor size1/3 \
Lens diameter4 mm
Focus adjustment2.0
Password protection typeUser
LED typeIR
Night vision distance30 m
Wi-FiNo
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
DC output voltage+12V
Power source typePoE
Power consumption (max)5 W
InterfaceRJ-45
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Width139.28 mm
Height76.9 mm
Weight500 g
Diameter60.4 mm

Related product manuals