Network Mini Dome Camera·Quick Start Guide
Do not tear off the protection film until the installation is
completed.
Do not touch the inside face of the bubble with your hands.
2.1.3 Pendent Mounting
Steps:
1. Install the bracket to the ceiling with the supplied screws in the
bracket package.
You need to purchases a pendant bracket separately if pendent
mounting is adopted.
2. Fix the camera body to the pendent bracket with the supplied
PM4X8 screws.
Fix the Adapter Plate Figure 2-10
3. Install the dome drive to the adapter plate.
To Next Page
Loading...
Need help?
General
