HIKVISION DS-2CD7126G0-IZS-B User Manual

Network Camera User Manual
101
8. Click Save to save the settings.
Configuring Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain
spots in the surveillance area from being live viewed and recorded.
Steps:
1. Enter the Privacy Mask Settings interface: Configuration > Image > Privacy
Mask.
2. Check the checkbox of Enable Privacy Mask to enable this function.
3. Click Draw Area.
Privacy Mask Settings
4. Click and drag the mouse in the live video window to draw the mask area.
Note: You are allowed to draw up to 4 areas on the same image.
5. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas

HIKVISION DS-2CD7126G0-IZS-B Specifications

General

Model	DS-2CD7126G0-IZS-B
Type	Network Camera
Image Sensor	1/2.8" Progressive Scan CMOS
Max Resolution	1920 × 1080
IR Range	Up to 30 m
Day/Night	ICR
Video Compression	H.265+/H.265/H.264+/H.264
Bit Rate	32 Kbps to 16 Mbps
Ingress Protection	IP67
Sensor Type	CMOS
Lens Type	Varifocal
Lens	Motorized zoom lens
Focal Length	2.8 mm to 12 mm
Minimum Illumination	0 Lux with IR
Network Interface	RJ45 (10/100Base-T)
Power Supply	DC12V ± 25%, PoE (802.3af)
Power Consumption	Max 10 W
Operating Conditions	-30 °C to 60 °C (-22 °F to 140 °F), humidity: 95% or less (non-condensing)
Resolution	1920 x 1080