HIKVISION DS-2CD7126G0-IZS-B User Manual

Network Camera User Manual
18
Activation Interface (Client Software)
6. Click OK button to start activation.
7. Click the Modify Netinfo button to pop up the Network Parameter Modification
interface, as shown in the figure below.
Modifying the Network Parameters
8. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
9. Input the password to activate your IP address modification.

HIKVISION DS-2CD7126G0-IZS-B Specifications

General

Brand	HIKVISION
Model	DS-2CD7126G0-IZS-B
Category	Security Camera
Language	English