HIKVISION DS-2CD7A26G0P-IZHS User Manual

DS-2CD7A26G0P-IZHS(8) License Plate Recognition (LPR) Camera Installation and Configuration Guide
ICG DS-2CD7A26G0P-IZHS(8) LPR Camera 080619NA 6
˗ Maintenance
> Replace after a serious electrical event (e.g., lighting blew out a transformer down the street)
> Replace yearly in storm-prone areas
> Replace every two years as routine maintenance
Symbol Conventions
Symbol ConventionsSymbol Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
SymbolSymbol
Symbol
Description
DescriptionDescription
Description
Provides additional information to emphasize or supplement important points of the main text
Indicates a potentially hazardous situation, which if not avoided, could result
in equipment damage, data loss,
performance degradation, or unexpected results
Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury
Safety Instructions
Safety InstructionsSafety Instructions
Safety Instructions
•
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end user.
•
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical
specifications for detailed information.
•
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100-240 VAC or 12 VDC according to the
IEC60950-1 standard. Please refer to technical specifications for detailed information.
•
Do not connect several devices to one power adapter as adapter overload may cause overheating or a fire hazard.
•
Please make sure that the plug is firmly connected into the power socket.
•
If smoke, odor, or noise rise from the device, turn off the power at once, unplug the power cable, and then contact the service center.
Preventive and Cautionary Tips
Preventive and Cautionary TipsPreventive and Cautionary Tips
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•
Ensure unit is installed in a well-ventilated, dust-free environment.
•
Unit is designed for indoor use only.
•
Keep all liquids away from the device.
•
Ensure environmental conditions meet factory specifications.
•
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive
electronics within the unit.
•
Use the device in conjunction with a UPS if possible.
•
Power down the unit before connecting and disconnecting accessories and peripherals.
•
A factory recommended HDD should be used for this device.
•
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used
batteries according to the instructions provided by the battery manufacturer.

HIKVISION DS-2CD7A26G0P-IZHS Specifications

General

Brand	HIKVISION
Model	DS-2CD7A26G0P-IZHS
Category	Security Camera
Language	English