Network Camera User Manual
55
the Start Time and End Time.
Set Schedule
Auto: The LED will be turned on according to the environment illumination.
5. Click Save to save the settings.
Configuring VCA Resource
Purpose:
VCA resource offers you options to enable certain VCA functions according to actual
need when several VCA functions are available. It helps allocate more resources to
the desired functions.
Steps:
1. Enter VCA Resource configuration interface:
Configuration > System > System Settings > VCA Resource
2. Select a desired VCA combination. Available VCA combination varies according
to different camera models.
3. Click Save to save the settings. A reboot is required after setting the VCA
Resource.
Notes:
• VCA combinations are mutually exclusive. When you activate one combination,
the others are hidden.
• The function may not be supported by some camera models.
Configuring Metadata Settings
Purpose:
Metadata is the raw data the camera collects before algorithm processing. Metadata of
intrusion detection, line crossing detection, region entrance detection, region exiting
To Next Page
Loading...
