EasyManuals Logo

HIKVISION DS-2DE2A204IW-DE3 User Manual

HIKVISION DS-2DE2A204IW-DE3
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Steps
1.
Go to Conguraon → Network → Advanced Sengs → FTP .
2.
Congure FTP sengs.
Server Address and Port
The FTP server address and corresponding port.
User Name and Password
The FTP user should have the permission to upload pictures.
If the FTP server supports picture uploading by anonymous users, you can check Anonymous
to hide your device informaon during uploading.
Directory Structure
The saving path of snapshots in the FTP server.
Picture Filling Interval
For beer picture management, you can set the picture ling interval from 1 day to 30 days.
Pictures captured in the same
me interval will be saved in one folder named aer the
beginning date and ending date of the me interval.
Picture Name
Set the naming rule for captured pictures. You can choose Default in the drop-down list to
use the default rule, that is, IP address_channel number_capture me_event type.jpg (e.g.,
10.11.37.189_01_20150917094425492_FACE_DETECTION.jpg). Or you can customize it by
adding a Custom
Prex to the default naming rule.
3.
Click Upload Picture to enable uploading snapshots to the FTP server.
4.
Click Test to verify the FTP server.
5.
Click Save.
6.1.3 Set NAS
Take network server as network disk to store the record les, captured images, etc.
Before You Start
Get the IP address of the network disk rst.
Steps
1.
Go to NAS
seng page: Conguraon → Storage → Storage Management → Net HDD .
2.
Click HDD No.. Enter the server address and le path for the disk.
Server Address
The IP address of the network disk.
File Path
The saving path of network disk les.
Mounng Type
Network Speed Dome User Manual
38

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE2A204IW-DE3 and is the answer not in the manual?

HIKVISION DS-2DE2A204IW-DE3 Specifications

General IconGeneral
Sensor typeCMOS
Progressive scanYes
Number of sensors1
Optical sensor size1/3 \
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Pan range0 - 330 °
Pan speed100 °/sec
White balanceATW, Auto, Manual
Tilt angle range0 - 90 °
Camera shutter speed1/1 - 1/30000 s
Minimum illumination0.005 lx
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
FocusMotorized/Manual
Digital zoom16 x
Optical zoom4 x
Focal length range- mm
Maximum aperture number2.7
Minimum aperture number1.6
Detection distance0.01 m
Audio input channels1 channels
Wi-Fi-
Number of users20 user(s)
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1x
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, SDXC
DC output voltage12
Power source typeDC
Power consumption (typical)12 W
Operating temperature (T-T)-20 - 60 °C
IK codeIK10
Form factorDome
Product colorBlack, White
Housing materialAcrylonitrile butadiene styrene (ABS), Aluminium, Polycarbonate (PC)
International Protection (IP) codeIP66
Weight and Dimensions IconWeight and Dimensions
Width130.7 mm
Height101.7 mm
Weight (with stand)530 g

Related product manuals