Network Speed Dome User Manual
Focus Settings
Focus Mode
The Focus Mode can be set to Auto, Manual, Semi-auto.
Auto:
The speed dome focuses automatically at any time according to objects in the
scene.
Semi-auto:
The speed dome focuses automatically only once after panning, tilting and
zooming.
Manual:
In Manual mode, you need to use on the control panel to focus
manually.
Min. Focus Distance
This function is used to limit the minimum focus distance.
The minimum focus value varies depending on the models of speed dome.
Day/Night Switch
The IR light related function introduced below is supported by IR speed domes
only.
Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day, Night, and
Scheduled-Switch.
Auto:
In Auto mode, the day mode and night mode can switch automatically
according to the light condition of environment. The switching sensitivity can
be set to Low, Normal, High.
Figure 6-29 Auto Mode Sensitivity
Day:
In Day mode, the speed dome displays color image. It is used for normal
lighting conditions.
Night:
In Night mode, the image is black and white. Night mode can increase the
sensitivity in low light conditions.
Schedule
To Next Page
Loading...
Need help?
General
