Network Speed Dome User Manual
Figure 4-11 Calling a Patrol
4.5.5 One-touch Patrol
Purpose:
One-touch patrol is an automatically created patrol. The system automatically add
preset No.1 to No.32 to the patrol path 8. You can call the one-touch patrol and the
speed dome moves as the patrol path 8 automatically.
Steps:
1. Set preset No.1 to No.32. Refer to 4.5.3 Setting/Calling a Preset for detailed
information of setting preset.
2. Call preset No. 45, and the speed dome moves as patrol path 8.
3. Click to enter the patrol settings interface and start/stop one-touch patrol,
edit the patrol time and the speed.
Figure 4-12 Patrol Path 8
To Next Page
Loading...
