Network Speed Dome User Manual
for motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion
Detection.
8. Click tab to select the linkage method taken for the video loss
alarm, Notify surveillance center, send email, upload to FTP, trigger channel,
smart tracking and trigger alarm output are selectable. Please Step 3 in Section
5.2.1 Configuring Motion Detection.
9. Click button to save the settings.
5.4 PTZ Configuration
5.4.1 Configuring Basic PTZ Parameters
Purpose:
You can configure the basic PTZ parameters, including proportional pan, preset
freezing, preset speed, etc.
1. Enter the Basic PTZ Parameter Configuration interface:
Configuration > PTZ > Basic Settings
Figure 5-29 Basic PTZ Configuration Interface
To Next Page
Loading...
