Network Speed Dome User Manual
The auxiliary functions include
light, wiper, auxiliary focus, lens
initialization, manual tracking,
and 3D positioning.
Adjust speed of pan/tilt
movements.
Refer to 4.5.3 for detailed
information of setting preset.
Refer to 4.5.4 for detailed
information of setting patrol.
Refer to 4.5.6 for detailed
information of setting pattern.
Buttons on the Preset/Patrol/Patterns interface:
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
4.5.2 Auxiliary Functions
The Auxiliary functions panel is shown in the figure below:
Figure 4-6 Auxiliary Functions
Light
Click to enable/disable the light supplement of the speed dome. This
function is reserved.
Wiper
Click to move the wiper once.
To Next Page
Loading...
