Network Speed Dome User Manual
Only live view is available for the anonymous user.
Steps:
1. Enter the Anonymous Visit interface:
Configuration> System> Security > Anonymous Visit
Figure 6-50 Anonymous Visit
2. Set the Anonymous Visit permission Enable or Disable in the drop-down list to
enable or disable the anonymous visit.
3. Click Save to save the settings.
There will be a checkbox of Anonymous by the next time you logging in.
Figure 6-51 Login Interface with an Anonymous Checkbox
4. Click Anonymous to login automatically.
By permitting the Anonymous “Live View” function, you may enable others to access
your speed dome and view live images without providing login credentials. It
therefore is critical when permitting the Anonymous "Live View" function to ensure
that your camera's field of view does not impact the privacy of individuals whose
images might be captured without authorization.
Given its inherent intrusiveness, video surveillance is inappropriate in areas where
people have a higher expectation of privacy.
Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or
not.
To Next Page
Loading...
Need help?
General
