Network Speed Dome User Manual
Figure 6-4 DynDNS Settings
IPServer:
Steps:
(1) Enter the Server Address of the IPServer.
(2) Click to save the settings.
The Server Address should be entered with the static IP address of the
computer that runs the IP Server software. For the IP Server, you have to
apply a static IP, subnet mask, gateway and preferred DNS from the ISP.
Figure 6-5 IPServer Settings
HiDDNS:
Steps:
(1) Enter the Server Address: e.g. www.hiddns.com.
(2) Enter the Domain name of the camera. The domain is the same with the
device alias in the HiDDNS server.
(3) Click to save the settings.
Figure 6-6 HiDDNS Settings
NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, enter the domain name obtained from the NO-IP
website.
(3) Enter the Port of NO-IP server.
(4) Enter the User Name and Password registered on the NO-IP website.
To Next Page
Loading...
