Network Speed Dome User Manual
Receiver: The name of the user to be notified.
Receiver’s Address: The email address of user to be notified.
You can click to check whether the setting is invalid after the
required parameters are configured.
3. Click to save the settings.
Configuring HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the
following steps to set the port number of https.
Example:
If you set the port number as 443 and the IP address is 192.168.1.64, you may access
the device by inputting https://192.168.1.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface.
Configuration > Network > Advanced Settings > HTTPS
2. Create the self-signed certificate or authorized certificate.
Figure 6-15 Create Certificate
OPTION 1: Create the self-signed certificate
1) Select Create Self-signed Certificate.
2) Click the Create button to create the following dialog box.
To Next Page
Loading...
