© Hikvision
4. Edit the camera name in the text field of Camera Name.
5. Select from the dropdown list to set the Time Format, Date Format, Display Mode, OSD Size，
Font Color and Alignment.
6. You can use the mouse to drag the text frame IPdome in the live view window to adjust the
OSD position.
Figure 6-40 Adjust OSD Location
7. Click to activate above settings.
Configuring Text Overlay Settings
Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay settings interface:
Configuration > Image > OSD Settings
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to drag the red text frame Text in the live view window to adjust the text
overlay position.
5. Click to save the settings.
6.2.3 Configuring Image Parameters Switch
Purpose:
To Next Page
Loading...
