© Hikvision
5.4.7 Clearing PTZ Configurations
Purpose:
You can clear PTZ configurations in this interface, including all presets, patrols, privacy masks, PTZ
limits, scheduled tasks and park actions.
Steps:
1. Enter the Clearing Configuration interface:
Configuration > PTZ > Clear Config
2. Check the checkbox of the items you want to clear.
Figure 5-37 Clear Config
3. Click to clear the settings.
5.4.8 Configuring Smart Tracking
Purpose:
The speed dome tracks the moving objects automatically after you configure this function.
Note:
The VCA speed dome do not support this function.
Steps:
1. Enter the Smart Tracking settings interface:
Configuration > PTZ > Smart Tracking
Figure 5-38 Configure Smart Tracking
To Next Page
Loading...
Need help?
General
