HIKVISION DS-2DF8A836IX-AEL User Manual

© Hikvision
1. Enter the Initial Position configuration interface:
Configuration > PTZ > Initial Position
Figure 5-31 PTZ Configuration
2. Click the PTZ control buttons to find a position as the initial position of the speed dome; you
can also call a defined preset and set it as the initial position of the speed dome.
3. Click Set to save the position.
 Call/delete an Initial Position:
You can click to call the initial position. You can click to delete the initial position and
restore the factory default initial position.
5.4.4 Configuring Park Actions
Purpose:
This feature allows the camera to start a predefined park action (scan, preset, pattern and etc.)
automatically after a period of inactivity (park time).
Notes:
 Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.
 Park function varies depending on different camera models.
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action

HIKVISION DS-2DF8A836IX-AEL Specifications

General

Brand	HIKVISION
Model	DS-2DF8A836IX-AEL
Category	Security Camera
Language	English