© Hikvision
Steps
1. Click Account Security Settings to enter setting interface.
Configuration > System > User Management > User Management
2. Select security questions and input your answers.
3. Input your E-mail address for password recovery.
4. Save the settings.
Password Recovery Operation
Before you start:
The PC used to reset password and the camera should belong to the same IP address
segment of the same LAN.
Steps:
1. Enter login interface via web browser.
2. Click Forget Password.
3. Follow pop-up message to complete operation.
Online Users
Enter the Online Users configuration interface:
Configuration > System > User Management > Online Users
Figure 6-62 Online Users
You can see the current users who are visiting the device through this interface.
User information, such as user name, level, IP address, and operation time, is displayed in the
User List. Click Refresh to refresh the list.
Note:
Administrator can control the Simultaneous Login. Click General on User Management page, and
set desired number. Admin password is required for this operation.
Figure 6-63 Simultaneous Login
To Next Page
Loading...
Need help?
General
