User Manual of PanoVu Series Network Camera
Add a User
Steps:
1. Click to add a user.
2. Input the new User Name, select Level and input Password.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The password
should be something of your own choosing (Using a minimum of 8 characters, including at
least three of the following categories: upper case letters, lower case letters, numbers, and
special characters.) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Note:
The level indicates the permissions you give to the user. You can define the user as
Operator or User.
3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the
permissions for the new user.
4. Click to finish the user addition.
Figure 7-17 Add a User
Modify a User
Steps:
1. Click to select the user from the list and click .
2. Modify the User Name, Level or Password.
To Next Page
Loading...
Need help?
General
